this is new server
Subscribe to our Free podcast

Subscribe to our free bi-weekly podcast from iTunes or Zune Marketplace. Once installed, subscribe to our channel and download directly to your computer
- no iPod or Zune needed!

Need Help?

    iTunes podcast
  • Make sure you have iTunes installed.
       Click here for the free download.
  • Once installed, click here to be redirected
       (your browser will launch iTunes!)
  • Click "Subscribe" button.
    Zune podcast
  • Make sure you have Zune software installed.
       Click here for the free download.
  • Once installed, click here to be redirected
       (your browser will launch Zune!)
  • Click "Subscribe" button.
    other alternatives: Juice – (formerly iPodder)

Podcasts also available at:
Podcast Alley - Podcast.com Daily Splice

Sterling Machinery Channel

Episodes Available (right click to download)

September 2, 2016
9" x 49" Used Bridgeport Vertical Mill, Mdl. 2J, Sony 2 Axis Digital Readout, Rapid Servo Power Feed, One-Shot Lube System, Collets, Work Light, Vise, Drill Chuck,  #A3615
Podcast #171 9" x 49" Used Bridgeport Vertical Mill, Mdl. 2J, Sony 2 Axis Digital Readout, Rapid Servo Power Feed, One-Shot Lube System, Collets, Work Light, Vise, Drill Chuck, #A3615
Direct Download (right click to save)

August 26, 2016
132 Ton x 3" Used Heim OBI Punch Press, Mdl. 3-GA, HEIM PLC Controller, Air Clutch & Brake, Dual Palm Control, One Shot Lube System,  #A3656
Podcast #170 32 Ton x 3" Used Heim OBI Punch Press, Mdl. 3-GA, HEIM PLC Controller, Air Clutch & Brake, Dual Palm Control, One Shot Lube System, #A3656
Direct Download (right click to save)

August 5, 2016
12" x 36" Used Clausing Engine Lathe, Mdl. 5914, Collet Closer, KDK Tool post w/holder, Work Light, Chip Tray, Flame Hardened Bed, Thread Indicator, Stand,  #A3549
Podcast #169 12" x 36" Used Clausing Engine Lathe, Mdl. 5914, Collet Closer, KDK Tool post w/holder, Work Light, Chip Tray, Flame Hardened Bed, Thread Indicator, Stand, #A3549
Direct Download (right click to save)

July 22, 2016
14" Used Pedrazzoli Super Brown Cold Saw, Mdl. SB350/60 MRM, Manual Vise, Quick Clamping, Coolant System, Emergency Push Button with Key on Control Panel, Miter Cutting, Extra Blades,  #A3541
Podcast #168 14" Used Pedrazzoli Super Brown Cold Saw, Mdl. SB350/60 MRM, Manual Vise, Quick Clamping, Coolant System, Emergency Push Button with Key on Control Panel, Miter Cutting, Extra Blades, #A3541
Direct Download (right click to save)

July 8, 2016
150 Ton x 6' Used Cyril Bath Co. Heavy Duty Air-Trip Mechanical Press Brake, Mdl. 150-4, Dual Palm Control, Auto-Lube System, Motorized Ram Adjustment With Indicators, Front Operated Manual Back Gauge, Air Trip Mechanical Clutch, Foot Pedal,  #A1986
Podcast #167 150 Ton x 6' Used Cyril Bath Co. Heavy Duty Air-Trip Mechanical Press Brake, Mdl. 150-4, Dual Palm Control, Auto-Lube System, Motorized Ram Adjustment With Indicators, Front Operated Manual Back Gauge, Air Trip Mechanical Clutch, Foot Pedal, #A1986
Direct Download (right click to save)

June 24, 2016
16" Used Leten Vertical Bandsaw, Mdl. LCM-400A, Blade Grinder, Blade Shear, Blade Welder, Blade Brush, Work Light, Coolant System,  #A3576
Podcast #166 16" Used Leten Vertical Bandsaw, Mdl. LCM-400A, Blade Grinder, Blade Shear, Blade Welder, Blade Brush, Work Light, Coolant System, #A3576
Direct Download (right click to save)

June 3, 2016
3/16
Podcast #165 3/16" x 9" x 9" Used Tennsmith Hydraulic Notcher, Mdl. PN9, Work Light, Timer, Foot Pedal, One-Shot Lube, Blades, #A3593
Direct Download (right click to save)

MAY 20, 2016
10&# x 50&# Used Trak CNC 2 Axis Vertical Knee Mill, Mdl. Trak K3SX, ProtoTrak SMX with Joy Stick, Maxi Torque-Rite Power Draw Bar, Mist Coolant, Knee Power Feed, Work Light, Auto Lubrication System,  Year (2007)  #A3537
Podcast 164 10&# x 50&# Used Trak CNC 2 Axis Vertical Knee Mill, Mdl. Trak K3SX, ProtoTrak SMX with Joy Stick, Maxi Torque-Rite Power Draw Bar, Mist Coolant, Knee Power Feed, Work Light, Auto Lubrication System, Year (2007) #A3537
Direct Download (right click to save)

MAY 6, 2016
10&# x 50&# Used Trak CNC 2 Axis Vertical Knee Mill, Mdl. Trak K4S, ProtoTrak SM Controller with Joy Stick, Mist Coolant, Auto Lube System, Maxi Torque-Rite Power Draw Bar, Work Light, Knee Power Feed, Chip Pan,  Year (2003)  #A3536
Podcast #163 10&# x 50&# Used Trak CNC 2 Axis Vertical Knee Mill, Mdl. Trak K4S, ProtoTrak SM Controller with Joy Stick, Mist Coolant, Auto Lube System, Maxi Torque-Rite Power Draw Bar, Work Light, Knee Power Feed, Chip Pan, Year (2003) #A3536
Direct Download (right click to save)

April 29, 2016
9" x 42" Used Bridgeport Prototrak CNC Vertical Milling Machine, Mdl. Series 1, Chrome Ways, Bijur Auto Lube System, Z Axis Quill Digital Readout, Prototrak M2 (2 Axis) Controller,  #A3182
Podcast #162 9" x 42" Used Bridgeport Prototrak CNC Vertical Milling Machine, Mdl. Series 1, Chrome Ways, Bijur Auto Lube System, Z Axis Quill Digital Readout, Prototrak M2 (2 Axis) Controller, #A3182
Direct Download (right click to save)

April 8, 2016
16" x 16" Used Wegoma Double Head Sliding Miter Saw, Mdl. SD16S, Pneumatic Holddowns, Adjustable Feed Rates, Controller, Non-Ferrous, Two 3 H.P. Cutting Heads with Miter & Compound Capabilities,  #A3491
Podcast #161 16" x 16" Used Wegoma Double Head Sliding Miter Saw, Mdl. SD16S, Pneumatic Holddowns, Adjustable Feed Rates, Controller, Non-Ferrous, Two 3 H.P. Cutting Heads with Miter & Compound Capabilities, #A3491
Direct Download (right click to save)

March 25, 2016
1/4" x 12' Used Standard Hydraulic Power Shear with Progammable Back Gauge Control, Mdl. AS250-12, Front Operated Digital Microcomputer Programmable Power Back Gauge, Manual Swingaway Back Gauge, Extra Blades, (2) Front Support Arms, Foot Pedal, Squaring Arm, Made In The U.S.A.,  Year (2005)  #A3510
Podcast #160 1/4" x 12' Used Standard Hydraulic Power Shear with Progammable Back Gauge Control, Mdl. AS250-12, Front Operated Digital Microcomputer Programmable Power Back Gauge, Manual Swingaway Back Gauge, Extra Blades, (2) Front Support Arms, Foot Pedal, Squaring Arm, Made In The U.S.A., Year (2005) #A3510
Direct Download (right click to save)

March 11, 2016
14" x 40" Used Jet Engine Gap Bed Engine Lathe, Mdl. GH-1440-ZX, Acu-Rite 2 Axis Digital Readout System, 10"- 3 Jaw Chuck, Quick Change Tool Post w/Holders, Work Light, Coolant System, Splash Guard, Trav-A-Dial, Work Light, Foot Brake, Made In China, NOTE:  Replacement Cost over $21,999,  Year (2008)  #A3519
Podcast #159 14" x 40" Used Jet Engine Gap Bed Engine Lathe, Mdl. GH-1440-ZX, Acu-Rite 2 Axis Digital Readout System, 10"- 3 Jaw Chuck, Quick Change Tool Post w/Holders, Work Light, Coolant System, Splash Guard, Trav-A-Dial, Work Light, Foot Brake, Made In China, NOTE: Replacement Cost over $21,999, Year (2008) #A3519
Direct Download (right click to save)

February 25, 2016
9" x 49" Used Vectrax Vertical Milling Machine, Mdl. GS16V, Acu-Rite 2 Axis Digital Readout, Accurite Z Axis Scale, Table Power Feed, One Shot Lube System, Mist Coolant, Made In Taiwan,  #A3520
Podcast #158 9" x 49" Used Vectrax Vertical Milling Machine, Mdl. GS16V, Acu-Rite 2 Axis Digital Readout, Accurite Z Axis Scale, Table Power Feed, One Shot Lube System, Mist Coolant, Made In Taiwan, #A3520
Direct Download (right click to save)

February 12, 2016
65 Ton x 10' Used Verson Press Brake, Mdl. 208-65, Front Operated Manual Back Gauge, Power Ram Adjustment with Indicators, Foot Treadle, Mechanical Clutch,  #8175
Podcast #157 65 Ton x 10' Used Verson Press Brake, Mdl. 208-65, Front Operated Manual Back Gauge, Power Ram Adjustment with Indicators, Foot Treadle, Mechanical Clutch, #8175
Direct Download (right click to save)

January 29, 2016
10 Ga. x 10' Used Wysong Power Shear, Mdl. 1010, Front Operated Power Back Gauge With Indicator, Square Arm, 2 - Large Front Supports, One Shot Lube System, Electric Foot Pedal,  #A1268
Podcast #156 10 Ga. x 10' Used Wysong Power Shear, Mdl. 1010, Front Operated Power Back Gauge With Indicator, Square Arm, 2 - Large Front Supports, One Shot Lube System, Electric Foot Pedal, #A1268
Direct Download (right click to save)

January 08, 2016
14 Ga. x 8' Used Birmingham Hydraulic Shear, Mdl. H-0825, (2) Front Supports, Foot Pedal, Rear Operated Manual Back Gauge,  Year (2002)  #A3474
Podcast #155 14 Ga. x 8' Used Birmingham Hydraulic Shear, Mdl. H-0825, (2) Front Supports, Foot Pedal, Rear Operated Manual Back Gauge, Year (2002) #A3474
Direct Download (right click to save)

December 25, 2015
 3/8 x 10' Used Niagara Hydraulic Power Shear, Mdl. IF-10-3/8, Front Operated Power Back Gauge With Indicator, Ball Transfer Table, Stroke Length Control, One Shot Lube System, Electric Foot Pedal, Note: All Above Ground, No Pit Required,  #A1549
Podcast #154 3/8" x 10' Used Niagara Hydraulic Power Shear, Mdl. IF-10-3/8, Front Operated Power Back Gauge With Indicator, Ball Transfer Table, Stroke Length Control, One Shot Lube System, Electric Foot Pedal, Note: All Above Ground, No Pit Required, #A1549
Direct Download (right click to save)

December 11, 2015
 3/16 x 8' Used Lodge & Shipley, Mdl. 0308, Front Operated Power Back Gauge with Indicator Air Clutch, Hydraulic Hold Downs#8433
Podcast #153 3/16" x 8' Used Lodge & Shipley, Mdl. 0308, Front Operated Power Back Gauge with Indicator Air Clutch, Hydraulic Hold Downs#8433
Direct Download (right click to save)

November 27, 2015
 14 Used Soco Fully Automatic Circular Coldsaw , Mdl. MC-350NFA, Sargon Digital Readout, Dust Collection System, Spray Mist Coolant System, Solid State Electronic Controller,  #A3428
Podcast #152 14" Used Soco Fully Automatic Circular Coldsaw , Mdl. MC-350NFA, Sargon Digital Readout, Dust Collection System, Spray Mist Coolant System, Solid State Electronic Controller, #A3428
Direct Download (right click to save)

November 06, 2015
 3/16 x 9
Podcast #151 3/16" x 9" x 9" Used Tennsmith Hydraulic Notcher, Mdl. PN9, Work Light, Timer, Foot Pedal, One-Shot Lube, Blades, #A3593
Direct Download (right click to save)

October 23, 2015
10 x 50 Used Trak CNC 2 Axis Vertical Knee Mill, Mdl. Trak K3SX, ProtoTrak SMX with Joy Stick, Maxi Torque-Rite Power Draw Bar, Mist Coolant, Knee Power Feed, Work Light, Auto Lubrication System,  Year (2007)  #A3537
Podcast #150 10" x 50" Used Trak CNC 2 Axis Vertical Knee Mill, Mdl. Trak K3SX, ProtoTrak SMX with Joy Stick, Maxi Torque-Rite Power Draw Bar, Mist Coolant, Knee Power Feed, Work Light, Auto Lubrication System, Year (2007) #A3537
Direct Download (right click to save)

October 09, 2015
 4-1/2 Used Zhouxiang Angle Bending Roll, Mdl. JW75S, Round Dies- 4-1/2, Double Round Dies- 2-1/4 and 2-3/4, 2 and 3-1/2, Channel DIes- 3-3/4, Flat/Square Dies- 4-1/2
Podcast #149 4-1/2" Used Zhouxiang Angle Bending Roll, Mdl. JW75S, Round Dies- 4-1/2", Double Round Dies- 2-1/4" and 2-3/4", 2" and 3-1/2", Channel DIes- 3-3/4", Flat/Square Dies- 4-1/2", 2-1/4" and other Misc. Dies Shown In Photo, Foot Pedal, Year (2009) #A2407
Direct Download (right click to save)

September 25, 2015
 10 x 50 Used Acer Ultima Vertcal Milling Machine, Mdl. EVS-3VKH, Newall 2 Axis Digital Readout System, Mist Coolant, AC Inverter Drive, One Shot Lube System, Table Power Feed, Pneumatic Power Draw Bar, Made In Taiwan,  #A3501
Podcast #148 10" x 50" Used Acer Ultima Vertcal Milling Machine, Mdl. EVS-3VKH, Newall 2 Axis Digital Readout System, Mist Coolant, AC Inverter Drive, One Shot Lube System, Table Power Feed, Pneumatic Power Draw Bar, Made In Taiwan, #A3501
Direct Download (right click to save)

September 04, 2015
 90 Ton x 10' Used Cincinnati Hydraulic Press Brake, Mdl. 90 CB-8, Foot Pedal, Stroke Control With Indicator,  #A3188
Podcast #147 90 Ton x 10' Used Cincinnati Hydraulic Press Brake, Mdl. 90 CB-8, Foot Pedal, Stroke Control With Indicator, #A3188
Direct Download (right click to save)

August 28, 2015
 9 x 49 Used Bridgeport By Hardinge 3 Axis CNC Vertical Milling Machine, Mdl. Series 1, Bijur Lubrication System, 10 Acu-Rite 3 Axis CNC Controller, Quick Change Tooling with Mach 1 Collet System, Trico MD-1200 Micro Dispenser, Z Axis (Knee) Power Feed, Z and W Axis Readout, Work Light,  #A3463
Podcast #146 9" x 49" Used Bridgeport By Hardinge 3 Axis CNC Vertical Milling Machine, Mdl. Series 1, Bijur Lubrication System, 10" Acu-Rite 3 Axis CNC Controller, Quick Change Tooling with Mach 1 Collet System, Trico MD-1200 Micro Dispenser, Z Axis (Knee) Power Feed, Z and W Axis Readout, Work Light, #A3463
Direct Download (right click to save)

August 07, 2015
135 Ton x 10' Used Pacific Hydraulic CNC Press Brake, Mdl. J135-10, Hurco 2 Axis CNC Control, Tonnage Control, Dual Palm Control Stand, Foot Pedal, Emergency Stop,  PRICE INCLUDES CUSTOM PAINT JOB #A3013
Podcast #145 135 Ton x 10' Used Pacific Hydraulic CNC Press Brake, Mdl. J135-10, Hurco 2 Axis CNC Control, Tonnage Control, Dual Palm Control Stand, Foot Pedal, Emergency Stop, PRICE INCLUDES CUSTOM PAINT JOB #A3013
Direct Download (right click to save)

July 17, 2015
 5 Cu. Ft. Used Roto-Finish Bowl Type Vibratory, Mdl. ER-0405 Spiratron, Controls With Timer, Parts/Media Seperator, Auto Lube System,  #A3419
Podcast #144 5 Cu. Ft. Used Roto-Finish Bowl Type Vibratory, Mdl. ER-0405 Spiratron, Controls With Timer, Parts/Media Seperator, Auto Lube System, #A3419
Direct Download (right click to save)

July 1, 2015
 37
Podcast #143 37" Used Timesaver Wet Belt Grinder, Mdl. 137-1HDMW, Paper Filter Coolant System, Stainless Steel Construction, Touch Screen Control, #A2755
Direct Download (right click to save)

June 12, 2015
 135 Ton x 10' Used Pacific Hydraulic CNC Press Brake, Mdl. J135-10, Hurco 2 Axis CNC Control, Tonnage Control, Dual Palm Control Stand, Foot Pedal, Emergency Stop,  PRICE INCLUDES CUSTOM PAINT JOB #A3013
Podcast #142 135 Ton x 10' Used Pacific Hydraulic CNC Press Brake, Mdl. J135-10, Hurco 2 Axis CNC Control, Tonnage Control, Dual Palm Control Stand, Foot Pedal, Emergency Stop, PRICE INCLUDES CUSTOM PAINT JOB #A3013
Direct Download (right click to save)

June 5, 2015
 5 Cu. Ft. Used Roto-Finish Bowl Type Vibratory, Mdl. ER-0405 Spiratron, Controls With Timer, Parts/Media Seperator, Auto Lube System,  #A3419
Podcast #141 5 Cu. Ft. Used Roto-Finish Bowl Type Vibratory, Mdl. ER-0405 Spiratron, Controls With Timer, Parts/Media Seperator, Auto Lube System, #A3419
Direct Download (right click to save)

May 22, 2015
14
Podcast #140 14" Used Soco Fully Automatic Circular Coldsaw , Mdl. MC-350NFA, Sargon Digital Readout, Dust Collection System, Spray Mist Coolant System, Solid State Electronic Controller, #A3428
Direct Download (right click to save)

May 1, 2015
 12 Ga. x 4' Used Wysong Power Shear With 48 Extended Backgauge and Magnetic Material Support, Mdl. 1252, Square Arm, Front Support, One Shot Lube System, Front Operated Manual Back Gauge, Magnetic Sheet Supports,  #A3414
Podcast #139 12 Ga. x 4' Used Wysong Power Shear With 48" Extended Backgauge and Magnetic Material Support, Mdl. 1252, Square Arm, Front Support, One Shot Lube System, Front Operated Manual Back Gauge, Magnetic Sheet Supports, #A3414
Direct Download (right click to save)

April 24, 2015
 1/4 x 10' Used Wysong Power Squaring Shear, Mdl. P37-134, Air Trip Mechanical Clutch, Front Operated Power Back Gauge, Auto Lube, Foot Pedal, Emergency Stop,  #A1732
Podcast #138 1/4" x 10' Used Wysong Power Squaring Shear, Mdl. P37-134, Air Trip Mechanical Clutch, Front Operated Power Back Gauge, Auto Lube, Foot Pedal, Emergency Stop, #A1732
Direct Download (right click to save)

April 17, 2015
 10 Ga. x 12' Used Niagara Power Shear, Mdl. 612A, Foot Treadle, 2 - Front Supports, 11' Heavy Duty Square Arm, Rear Operated Manual Back Gauge,  #A2571
Podcast #137 10 Ga. x 12' Used Niagara Power Shear, Mdl. 612A, Foot Treadle, 2 - Front Supports, 11' Heavy Duty Square Arm, Rear Operated Manual Back Gauge, #A2571
Direct Download (right click to save)

March 20, 2015
3/8 x 8' Used Davi Double Pinch 4 Roll Plate Roll Forming Machine, Mdl. MCB-2522, Hydraulic Drop End,  Year (2001)  #A3371
Podcast #136 3/8" x 8' Used Davi Double Pinch 4 Roll Plate Roll Forming Machine, Mdl. MCB-2522, Hydraulic Drop End, Year (2001) #A3371
Direct Download (right click to save)

February 20, 2015
 14 Ga. x 4' Used Wysong Power Shear, Mdl. 1452, Foot Treadle, Square Arm, Front Support, One Shot Lube System, Rear Operated Manual Backgauge,  #A1987
Podcast #135 14 Ga. x 4' Used Wysong Power Shear, Mdl. 1452, Foot Treadle, Square Arm, Front Support, One Shot Lube System, Rear Operated Manual Backgauge, #A1987
Direct Download (right click to save)

February 06, 2015
 3/16 x 8' Used Wysong Heavy Duty Power Shear, Mdl. 1096-HD, Oversized Flywheel, Heavy Duty Knife Bar, Heavy Duty Gear Box, Foot Treadle, Rear Operated Manual Back Gauge,  #A2715
Podcast #134 3/16" x 8' Used Wysong Heavy Duty Power Shear, Mdl. 1096-HD, Oversized Flywheel, Heavy Duty Knife Bar, Heavy Duty Gear Box, Foot Treadle, Rear Operated Manual Back Gauge, #A2715
Direct Download (right click to save)

January 25, 2015
 9 x 17 Used Hardinge High Speed Super Precision Second Operation Turret Lathe, Mdl. DSM-59, Hardinge Tool Post, Double Tool Post Cross Slide, Preloaded Ball Bearing Turret, Welded Steel Pedestal with Knee Space, 2 Speed Headstock, 6 Position Lever Bed Turret, Flood Coolant Pump, Production Slide,  #A3387
Podcast #133 9" x 17" Used Hardinge High Speed Super Precision Second Operation Turret Lathe, Mdl. DSM-59, Hardinge Tool Post, Double Tool Post Cross Slide, Preloaded Ball Bearing Turret, Welded Steel Pedestal with Knee Space, 2 Speed Headstock, 6 Position Lever Bed Turret, Flood Coolant Pump, Production Slide, #A3387
Direct Download (right click to save)

January 06, 2015
 38 CFM Brand New Quincy Simplex Reciprocating VERTICAL Air Compressor, Mdl. QT10-120H, ASME-Coded Relief Valves In The Inter-Stage, Discharge Line, and Receiver Tank, Non-Asbestos Gaskets, Splash Lubrication System, Manual Tank Drain, Inlet Air Filter, Totally Enclosed Belt Guard, Pressure Gauge & Service Valve, Pressure Switch, Fan Type Cooler, #SMQT10120H
Podcast #132 38 CFM Brand New Quincy Simplex Reciprocating VERTICAL Air Compressor, Mdl. QT10-120H, ASME-Coded Relief Valves In The Inter-Stage, Discharge Line, and Receiver Tank, Non-Asbestos Gaskets, Splash Lubrication System, Manual Tank Drain, Inlet Air Filter, Totally Enclosed Belt Guard, Pressure Gauge & Service Valve, Pressure Switch, Fan Type Cooler, #SMQT10120H
Direct Download (right click to save)

December 06, 2014
 9
Podcast #131 9" x 50" Brand New Acra Variable Speed Knee Mill, Mdl. LCM-50, Milled Oil Grooves, Hard Chrome Ways, Hand Scraped Saddle, Meechanite Casting, ABEC-7 Spindle Bearings, One Shot Lube System, #SMLCM50
Direct Download (right click to save)

November 06, 2014
 3/16
Podcast #130 3/16" x 8 Used Wysong Heavy Duty Power Shear, Mdl. 1096-HD, Oversized Flywheel, Heavy Duty Knife Bar, Heavy Duty Gear Box, Foot Treadle, Rear Operated Manual Back Gauge, #A2715
Direct Download (right click to save)

October 06, 2014
 Used Davi Double Pinch 4 Roll Plate Roll Forming Machine, Mdl. MCB-2522, Hydraulic Drop End,  Year (2001)  #A3371
Podcast #129 Used Davi Double Pinch 4 Roll Plate Roll Forming Machine, Mdl. MCB-2522, Hydraulic Drop End, Year (2001) #A3371
Direct Download (right click to save)

September 22, 2014
USED WYSONG POWER SHEAR, FRONT SUPPORT, FOOT TREADLE AND SQUARE ARM A1987
Podcast #128 USED WYSONG POWER SHEAR, FRONT SUPPORT, FOOT TREADLE AND SQUARE ARM A1987
Direct Download (right click to save)
USED WYSONG POWER SHEAR, FRONT SUPPORT, FOOT TREADLE AND SQUARE ARM A1987

September 8, 2014
Atrump spacesaver
Podcast #127 Atrump spacesaver
Direct Download (right click to save)
Atrump spacesaver

August 27, 2014
15 x 42 15 x 42 Used Leblond Lathe
Podcast #126 15" x 42" Used Leblond Lathe
Direct Download (right click to save)
15" x 42" Used Leblond Lathe

August 10, 2014
#14 R.M.S. Mirco Controlled Rebar Bender
Podcast #125 #14 R.M.S. Mirco Controlled Rebar Bender
Direct Download (right click to save)
#14 R.M.S. Mirco Controlled Rebar Bender

July 25, 2014
 14 Ga. x 10' Used Tennsmith Power Shear, Mdl. LM-1014, Front Operated Manual Back Gauge With Indicator, Foot Pedal, Stroke Length Control, Stroke Counter,  #A3345
Podcast #124 14 Ga. x 10' Used Tennsmith Power Shear, Mdl. LM-1014, Front Operated Manual Back Gauge With Indicator, Foot Pedal, Stroke Length Control, Stroke Counter, #A3345
Direct Download (right click to save)
14 Ga. x 10' Used Tennsmith Power Shear, Mdl. LM-1014, Front Operated Manual Back Gauge With Indicator, Foot Pedal, Stroke Length Control, Stroke Counter, #A3345

July 10, 2014
175 Ton x 8' Used Pacific CNC Hydraulic Press Brake, Mdl. K175-8, Automec CNC 2000, Single Axis Backgauge, Dual Palm Control On Ram, Auto Lube System, (2) Electric Foot Pedals, 2 Speed Ram,  #A1152
Podcast #123 175 Ton x 8' Used Pacific CNC Hydraulic Press Brake, Mdl. K175-8, Automec CNC 2000, Single Axis Backgauge, Dual Palm Control On Ram, Auto Lube System, (2) Electric Foot Pedals, 2 Speed Ram, #A1152
Direct Download (right click to save)
175 Ton x 8' Used Pacific CNC Hydraulic Press Brake, Mdl. K175-8, Automec CNC 2000, Single Axis Backgauge, Dual Palm Control On Ram, Auto Lube System, (2) Electric Foot Pedals, 2 Speed Ram, #A1152

June 30, 2014
35 Ton x 3 Used Bliss O.B.I. Punch Press, Mdl. C-35, Air Clutch & Brake, Auto Lube, Dual Palm Control, Top Stop, Emergency Stop, Air Filter & Regulator, Safety Light Curtains, Foot Pedal,  #A2156
Podcast #122 35 Ton x 3" Used Bliss O.B.I. Punch Press, Mdl. C-35, Air Clutch & Brake, Auto Lube, Dual Palm Control, Top Stop, Emergency Stop, Air Filter & Regulator, Safety Light Curtains, Foot Pedal, #A2156
Direct Download (right click to save)
Podcast #122 35 Ton x 3" Used Bliss O.B.I. Punch Press, Mdl. C-35, Air Clutch & Brake, Auto Lube, Dual Palm Control, Top Stop, Emergency Stop, Air Filter & Regulator, Safety Light Curtains, Foot Pedal, #A2156

June 10, 2014
14 Ga. x 10' Used Wysong Power Shear, Mdl. 1410, Auto Lube System, Foot Treadle,  #A3149
Podcast #121 San Onofre Nuclear Generating Station auction
Direct Download (right click to save)
San Onofre Nuclear Generating Station auction

May 30, 2014
14 Ga. x 10' Used Wysong Power Shear, Mdl. 1410, Auto Lube System, Foot Treadle,  #A3149
Podcast #120 14 Ga. x 10' Used Wysong Power Shear, Mdl. 1410, Auto Lube System, Foot Treadle, #A3149
Direct Download (right click to save)
14 Ga. x 10' Used Wysong Power Shear, Mdl. 1410, Auto Lube System, Foot Treadle, #A3149

May 10, 2014
143 Ton x 10' Used Trumpf CNC Hydraulic Heavy Duty High Precision Press Brake, Mdl. TrumaBend V130, 4 Axis Trumpf CNC Back Gauge, Operator Control Pedestal, Light Curtains, Adjustable Material Supports, Barrier Guards, Motor Driven Crowning,  Year (1998)  #A3137
Podcast #119 143 Ton x 10' Used Trumpf CNC Hydraulic Heavy Duty High Precision Press Brake, Mdl. TrumaBend V130, 4 Axis Trumpf CNC Back Gauge, Operator Control Pedestal, Light Curtains, Adjustable Material Supports, Barrier Guards, Motor Driven Crowning, Year (1998) #A3137
Direct Download (right click to save)
143 Ton x 10' Used Trumpf CNC Hydraulic Heavy Duty High Precision Press Brake, Mdl. TrumaBend V130, 4 Axis Trumpf CNC Back Gauge, Operator Control Pedestal, Light Curtains, Adjustable Material Supports, Barrier Guards, Motor Driven Crowning, Year (1998) #A3137

Apr 29, 2014
187 Ton x 13' Used Trumpf CNC Hydraulic Heavy Duty, High Precision Press Brake, Mdl. TrumaBend V170, Operator Control Pedestal, Light Curtains, 4 Axis Trumpf CNC Back Gauge, Adjustable Front Supports, Hydraulic Clamping, Motor Driven Crowning, Ram Y Axis CNC Y1 & Y2,
Podcast #118 187 Ton x 13' Used Trumpf CNC Hydraulic Heavy Duty, High Precision Press Brake, Mdl. TrumaBend V170, Operator Control Pedestal, Light Curtains, 4 Axis Trumpf CNC Back Gauge, Adjustable Front Supports, Hydraulic Clamping, Motor Driven Crowning, Ram Y Axis CNC Y1 & Y2, "I" Axis for Bed Movement to do Hemming and Flattening Techniques, Year (1999) #A3136
Direct Download (right click to save)
187 Ton x 13' Used Trumpf CNC Hydraulic Heavy Duty, High Precision Press Brake, Mdl. TrumaBend V170, Operator Control Pedestal, Light Curtains, 4 Axis Trumpf CNC Back Gauge, Adjustable Front Supports, Hydraulic Clamping, Motor Driven Crowning, Ram Y Axis CNC Y1 & Y2, "I" Axis for Bed Movement to do Hemming and Flattening Techniques, Year (1999) #A3136

Apr 20, 2014
3/16
Podcast #117 3/8" x 4' Used Metal Muncher Hydraulic Heavy Duty Shear, Mdl. PS-4800, Shear 1" x 18", Electric Foot Pedal, Price is Cleaned, Painted and RECONDITIONED with Guarantee #A2562 **LOCATED IN ROSEMEAD, CA**
Direct Download (right click to save)
3/8" x 4' Used Metal Muncher Hydraulic Heavy Duty Shear, Mdl. PS-4800, Shear 1" x 18", Electric Foot Pedal, Price is Cleaned, Painted and RECONDITIONED with Guarantee #A2562 **LOCATED IN ROSEMEAD, CA**

Apr 10, 2014
3/16
Podcast #116 3/16" x 12' Used Cincinnati Mechanical Power Shear, Mdl. 1412, Counter Balances, Foot Treadle, (2) 36" Front Supports, Rear Operated Manual Back Gauge, 145" Squaring Arm, Lube System, #A3178
Direct Download (right click to save)

3/16" x 12' Used Cincinnati Mechanical Power Shear, Mdl. 1412, Counter Balances, Foot Treadle, (2) 36" Front Supports, Rear Operated Manual Back Gauge, 145" Squaring Arm, Lube System, #A3178

Mar 25, 2014
230 Ton x 12' Used Cincinnati Hydraulic CNC Press Brake, Mdl. 230FM-10, Comp-U-Bend 61000 CNC Backgauge Controller, Foot Pedal, Tonnage Control, Stroke Control, Front Operated Palm Control Ram Adjustment, Heavy Duty Flanged T-Slotted Bed, Includes Die Rail,  #A3179
200 Ton x 12' Used Standard Hydraulic CNC (Heavy Duty) Press Brake, Mdl. AB200-12, Tonnage Gauge With Indicator, Automec Autogauge CNC 99 2 Axis Pedestal Controller, Automec CNC Back Gauge G24, Made In The USA!, Front Operated Palm Control Ram Adjustment, Dual Palm Remote Control Stand with Emergency Stop, Heavy Duty, 2 Speed Ram, Hydraulic Pressure Tonnage Control, #A3187
Direct Download (right click to save)

200 Ton x 12' Used Standard Hydraulic CNC (Heavy Duty) Press Brake, Mdl. AB200-12, Tonnage Gauge With Indicator, Automec Autogauge CNC 99 2 Axis Pedestal Controller, Automec CNC Back Gauge G24, Made In The USA!, Front Operated Palm Control Ram Adjustment, Dual Palm Remote Control Stand with Emergency Stop, Heavy Duty, 2 Speed Ram, Hydraulic Pressure Tonnage Control, #A3187

Mar 10, 2014
230 Ton x 12' Used Cincinnati Hydraulic CNC Press Brake, Mdl. 230FM-10, Comp-U-Bend 61000 CNC Backgauge Controller, Foot Pedal, Tonnage Control, Stroke Control, Front Operated Palm Control Ram Adjustment, Heavy Duty Flanged T-Slotted Bed, Includes Die Rail,  #A3179
Podcast #114 230 Ton x 12' Used Cincinnati Hydraulic CNC Press Brake, Mdl. 230FM-10, Comp-U-Bend 61000 CNC Backgauge Controller, Foot Pedal, Tonnage Control, Stroke Control, Front Operated Palm Control Ram Adjustment, Heavy Duty Flanged T-Slotted Bed, Includes Die Rail, #A3179
Direct Download (right click to save)

230 Ton x 12' Used Cincinnati Hydraulic CNC Press Brake, Mdl. 230FM-10, Comp-U-Bend 61000 CNC Backgauge Controller, Foot Pedal, Tonnage Control, Stroke Control, Front Operated Palm Control Ram Adjustment, Heavy Duty Flanged T-Slotted Bed, Includes Die Rail, #A3179

Feb 16, 2014
Podcast #112 - 12 New Scotchman (VARIABLE SPEED, AUTOMATIC VISE CLAMPING AND AUTOMATIC POWER DOWN FEED) Circular Cold Saw (For Cutting Steel, Stainless, Aluminum, Brass, Copper, Plastics), Mdl. CPO 315 HFA
Podcast #113 40"/60" x 160" Used Vantage Heavy Duty Gap Bed Big 12" Hole Hollow Oil Country Engine Lathe With Double Chucks, Mdl. V12, 28"- 4 Jaw Chuck On Front, 32"- 3 Jaw on Rear, Taper Attachment, 14" Steady Rest, 24" Steady Rest, 2 Speed Tailstock, 6 Way Rapid Traverse, Hardened And Ground Bed Way, Thread Dial, Coolant System, RPM LCD Meter, Variable Speed Controller On Carriage, Year (1998) #A3123
Direct Download (right click to save)

40"/60" x 160" Used Vantage Heavy Duty Gap Bed Big 12" Hole Hollow Oil Country Engine Lathe With Double Chucks, Mdl. V12, 28"- 4 Jaw Chuck On Front, 32"- 3 Jaw on Rear, Taper Attachment, 14" Steady Rest, 24" Steady Rest, 2 Speed Tailstock, 6 Way Rapid Traverse, Hardened And Ground Bed Way, Thread Dial, Coolant System, RPM LCD Meter, Variable Speed Controller On Carriage, Year (1998) #A3123

Jan 23, 2014
Podcast #112 - 12 New Scotchman (VARIABLE SPEED, AUTOMATIC VISE CLAMPING AND AUTOMATIC POWER DOWN FEED) Circular Cold Saw (For Cutting Steel, Stainless, Aluminum, Brass, Copper, Plastics), Mdl. CPO 315 HFA
Podcast #113 20"/29" x 80" Brand New Birmingham Gap Bed Engine Lathe, Mdl. YCL-2080, 3 Jaw Chuck, 4 Jaw Chuck, Steady Rest, Follow Rest, Faceplate, Tool Post, Taper Attachment, Foot Brake, Splash Guard, #A3087
Direct Download (right click to save)

20"/29" x 80" Brand New Birmingham Gap Bed Engine Lathe, Mdl. YCL-2080, 3 Jaw Chuck, 4 Jaw Chuck, Steady Rest, Follow Rest, Faceplate, Tool Post, Taper Attachment, Foot Brake, Splash Guard, #A3087

Dec 14, 2013
Podcast #112 - 12 New Scotchman (VARIABLE SPEED, AUTOMATIC VISE CLAMPING AND AUTOMATIC POWER DOWN FEED) Circular Cold Saw (For Cutting Steel, Stainless, Aluminum, Brass, Copper, Plastics), Mdl. CPO 315 HFA
Podcast #112 12" New Scotchman (VARIABLE SPEED, AUTOMATIC VISE CLAMPING AND AUTOMATIC POWER DOWN FEED) Circular Cold Saw (For Cutting Steel, Stainless, Aluminum, Brass, Copper, Plastics), Mdl. CPO 315 HFA
Direct Download (right click to save)

12" New Scotchman (VARIABLE SPEED, AUTOMATIC VISE CLAMPING AND AUTOMATIC POWER DOWN FEED) Circular Cold Saw (For Cutting Steel, Stainless, Aluminum, Brass, Copper, Plastics), Mdl. CPO 315 HFA

Dec 14, 2013
Podcast #111 - 7 x 11 Brand New Scotchman Swivel Head Utility Metal Cutting Horizontal BandSaw, Mdl. SU-280
Podcast #111 7" x 11" Brand New Scotchman Swivel Head Utility Metal Cutting Horizontal BandSaw, Mdl. SU-280
Direct Download (right click to save)

7" x 11" Brand New Scotchman Swivel Head Utility Metal Cutting Horizontal BandSaw, Mdl. SU-280

Dec 1, 2013
Podcast #110 - 20 Brand New Scotchman (Non-Ferrous Extrusion Cutting) Upcut Circular Cold Saw, Mdl. SUP-500 NF #SMSUP500NF
Podcast #110 20" Brand New Scotchman (Non-Ferrous Extrusion Cutting) Upcut Circular Cold Saw, Mdl. SUP-500 NF #SMSUP500NF
Direct Download (right click to save)

20" Brand New Scotchman (Non-Ferrous Extrusion Cutting) Upcut Circular Cold Saw, Mdl. SUP-500 NF

Nov 25, 2013
Podcast #109 -12 Ga. x 4 Used Whitney Jensen Leaf Combination Brake, Mdl. 412, #A2775
Podcast #109 12 Ga. x 4' Used Whitney Jensen Leaf Combination Brake, Mdl. 412, #A2775
Direct Download (right click to save)

12 Ga. x 4' Used Whitney Jensen Leaf Combination Brake, Mdl. 412

Nov 1, 2013
Podcast #108 - 16 x 40 Used Harrison Engine Lathe, Mdl. M400, #A1712
Podcast #108 90 Ton x 12' Used Wysong Press Brake, Mdl. 90-10, #A1712
Direct Download (right click to save)

90 Ton x 12' Used Wysong Press Brake, Mdl. 90-10,

Nov 1, 2013
Podcast #107 Ton x 12' Used Wysong Hydraulic Press Brake, Mdl. MTH100 - 144, #A1051
Podcast #107 100 Ton x 12' Used Wysong Hydraulic Press Brake, Mdl. MTH100 - 144, #A1051
Direct Download (right click to save)

Wysong Hydraulic Press Brake, Mdl. MTH100

Sep 27, 2013
Podcast #106 - 16
Podcast #106 - 16" x 40" Used Harrison Engine Lathe, Mdl. M400, #A2780
Direct Download (right click to save)

Harrison Engine Lathe, Model M400

Aug 23, 2013
Podcast #105 - 120 Ton x 10' Used Accurpress Press Brake, Mdl. 712020, #A2712
Podcast #105 - 120 Ton x 10' Used Accurpress Press Brake, Mdl. 712020, #A2712
Direct Download (right click to save)

Accurpress CNC Hydraulic Press Brake, Model 712020

Jul 29, 2013
Podcast #104 - 100 Ton x 10' Used Accurpress CNC Hydraulic Press Brake, Mdl. 710010, #A2853
Podcast #104 - Used Accurpress CNC Hydraulic Press Brake, Mdl. 710010, #A2853
Direct Download (right click to save)

Accurpress CNC Hydraulic Press Brake, Model 710010

Jul 10, 2013
Podcast #103 - 14 Ga. x 4' Used Chicago Box and Pan Finger Brake, Mdl. BPO414-6, Stand, Fingers In Nice Condition, Counter Weight, #A2776
Podcast #103 - 14 Ga. x 4' Used Chicago Box and Pan Finger Brake
Direct Download (right click to save)

14 Ga. x 4' Used Chicago Box and Pan Finger Brake

Jun 26, 2013
Podcast #102 - 9
Podcast #102 - 9" x 42" Used Bridgeport Vertical Mill Model Series 1
Direct Download (right click to save)

9" x 42" Used Bridgeport Vertical Mill Model Series 1

May 30, 2013
Podcast #101 - 16 Ga. x 4' Brand New National Hydraulic Shear, Model NH5216
Podcast #101 - 16 Ga. x 4' Brand New National Hydraulic Shear, Model NH5216
Direct Download (right click to save)

16 Ga. x 4' Brand New National Hydraulic Shear

May 9, 2013
Podcast #100 - Scotchman CPO-350LT vs. CPO-350LTPK vs. CPO-350LTPKPD
Podcast #100 - Scotchman CPO-350LT vs. CPO-350LTPK vs. CPO-350LTPKPD
Direct Download (right click to save)

Scotchman CPO-350 Series Comparison

Apr 15, 2013
Podcast #99 - 45 Ton Brand New Scotchman Ironworker
Podcast #99 - 45 Ton Brand New Scotchman Ironworker, Model Porta Fab 45
Direct Download (right click to save)

45 Ton Brand New Scotchman Ironworker

Apr 2, 2013
Podcast #98 - 60 Ton x 4
Podcast #98 - 60 Ton x 4" Used Niagara OBI Press, Model M60
Direct Download (right click to save)

60 Ton x 4" Used Niagara OBI Press

Mar 20, 2013
Podcast #97 - 60 Ton x 6
Podcast #97 - 60 Ton x 6" Used Niagara Gap Frame Punch Press, Model AF4S
Direct Download (right click to save)

60 Ton x 6" Niagara Gap Frame Punch Press

Mar 7, 2013
Podcast #96 - 28
Podcast #96 - 28" x 50" Used Sidney Engine Lathe, Model 2550
Direct Download (right click to save)

Sidney Engine Lathe Model 2550 | 9400

Feb 22, 2013
Podcast #95 - 3' x 12' Used DoAll Radial Drilling Machine Model D5100R
Podcast #95 - 3' x 12' Used DoAll Radial Drilling Machine Model D5100R
Direct Download (right click to save)

DoAll Radial Drilling Machine Model D5100R | A2593

Feb 12, 2013
Podcast #94 - 9
Podcast #94 - 9" x 48" Used Bridgeport Vertical Mill Model Series 1
Direct Download (right click to save)

Bridgeport Vertical Mill Model Series 1 | A2647

Jan 30, 2013
Podcast #93 - Used Summit Gap Bed Heavy Duty Engine Lathe | A2634
Podcast #93 - Used Summit Gap Bed Heavy Duty Engine Lathe | A2634
Direct Download (right click to save)

Summit Gap Bed Heavy Duty Engine Lathe | A2634

Jan 11, 2013
Podcast #92 - 32
Podcast #92 - 32" Used Speedfam Lapping Machine, Mdl. 32DGW | A2354
Direct Download (right click to save)

32" Used Speedfam Lapping Machine, Mdl. 32DGW | A2354

Dec 26, 2012
Podcast #91 - 36
Podcast #91 - 36" Blanchard Rotary Surface Grinder, Model 18-36 | A2515
Direct Download (right click to save)

36" Blanchard Rotary Surface Grinder, Model 18-36, #A2515

Dec 10, 2012
Podcast #90 - 230 Ton x 12' Used Cincinnati Hydraulic Press Brake | A2355
Podcast #90 - 230 Ton x 12' Used Cincinnati Hydraulic Press Brake | A2355
Direct Download (right click to save)

90 Ton Used Piranha Hydraulic Multi Station Ironworker, #A2388

Dec 3, 2012
Podcast #89 - 90 Ton Used Piranha Hydraulic Multi Station Ironworker | A2388
Podcast #89 - 90 Ton Used Piranha Hydraulic Multi Station Ironworker | A2388
Direct Download (right click to save)

90 Ton Used Piranha Hydraulic Multi Station Ironworker, #A2388

Nov 30, 2012
Podcast #88 - 9
Podcast #88 - 9" x 42" Used Bridgeport Vertical Milling Machine | A2493
Direct Download (right click to save)

50" x 20" x 20" Used Fadal CNC Machining Center, Model VMC5020A, #A2148

Oct 22, 2012
Podcast #87 - 50
Podcast #87 - 50" x 20" x 20" Used Fadal CNC Machining Center, Model VMC5020A | A2148
Direct Download (right click to save)

50" x 20" x 20" Used Fadal CNC Machining Center, Model VMC5020A, #A2148

Oct 1, 2012
Podcast #86 - 5 Ton Used Hannifin C Frame Hydraulic Press, Model OG-F5B | A2376
Podcast #86 - 5 Ton Used Hannifin C Frame Hydraulic Press, Model OG-F5B | A2376
Direct Download (right click to save)

5 Ton Used Hannifin C Frame Hydraulic Press, Mdl. OG-F5B, Dual Finger Push Button and Foot Control, #A2376

Sep 17, 2012
Podcast #85 - 14
Podcast #85 - 14"/20" x 33" Used Cut King Heavy Duty Gap Bed Engine Lathe | A2441
Direct Download (right click to save)

14"/20" x 33" Used Cut King Heavy Duty Gap Bed Engine Lathe, Model 850G, #A2441

Aug 27, 2012
Podcast #84 - 20
Podcast #84 - 20" x 40" Used Kent Automatic Surface Grinder, Model KGS-510AHD | A2339
Direct Download (right click to save)

20" x 40" Used Kent Automatic Surface Grinder, Model KGS-510AHD, #A2339

Aug 8, 2012
Podcast #83 - 52
Podcast #83 - 52" Used Timesavers Vision Orbital Twin Pad Sander and Rotary Brush Programmable Sanding Machine, A2331
Direct Download (right click to save)

52" Used Timesavers Vision Orbital Twin Pad Sander and Rotary Brush Programmable Sanding Machine, #A2331

Aug 1, 2012
Podcast #82 - 10 Ga. x 10' Brand New Birmingham Hydraulic Box and Pan Brake, Hydraulic Ram | VH-1010-6
Podcast #82 - 10 Ga. x 10' Brand New Birmingham Hydraulic Box and Pan Brake, Auto Bend Mode and Jog, Hydraulic Ram, VH-1010-6
Direct Download (right click to save)

10 Ga. x 10' Brand New Birmingham Hydraulic Box and Pan Brake, #VH-1010-6

Jul 6, 2012
Podcast #81 - 16 Ga. x 4' Used Tennsmith Powered Slip Rolls, Mdl. SR48P, Stand, Foot Pedal, Manual Drop End | A2328
Podcast #81 - 16 Ga. x 4' Used Tennsmith Powered Slip Rolls, Model SR48P, Stand, Foot Pedal, Manual Drop End, A2328
Direct Download (right click to save)

16 Ga. x 4' Used Tennsmith Powered Slip Rolls, #A2328

Jun 18, 2012
Podcast #80 - 115 Ton Used Denison Multi-Press Hydraulic C Frame Press, Mdl. HA15C92D13A68, Dual Variable Speed Approach & Return Joysticks, PSI Gauge | A2256
Podcast #80 - 115 Ton Used Denison Multi-Press Hydraulic C Frame Press, A2256
Direct Download (right click to save)

115 Ton Used Denison Multi-Press Hydraulic C Frame Press, #A2256

May 31, 2012
Podcast #79 - 125 Ton Used PHI Credit Card Hydraulic Laminating Press | A2301
Podcast #79 - 125 Ton Used PHI Credit Card Hydraulic Laminating Press, A2301
Direct Download (right click to save)

125 Ton Used PHI Credit Card Hydraulic Laminating Press, #A2301

May 8, 2012
Podcast #78 - 27 Ton Brand New APMC Hydraulic Clicker Press, Model APM-SA27 | A2272
Podcast #78 - 27 Ton Brand New APMC Hydraulic Clicker Press, A2272
Direct Download (right click to save)

27 Ton Brand New APMC Hydraulic Clicker Press, #A2272

Apr 23, 2012
Podcast #77 - 10 Ga. x 8' Used Niagara Mechanical Power Shear Model 1R-8-10 | A2199
Podcast #77 - 10 Ga. x 8' Niagara Mechanical Power Shear, A2199
Direct Download (right click to save)

10 Ga. x 8' Niagara Mechanical Power Shear, #A2199

Apr 10, 2012
Podcast #76 - 9
Podcast #76 - 9" x 48" Used Bridgeport Vertical Milling Machine, A2183
Direct Download (right click to save)

Bridgeport Vertical Milling Machine, Mdl. Series 1, #A2183

Mar 26, 2012
Podcast #75 - 11
Podcast #75 - Hardinge Tool Room Precision Lathe, A2177
Direct Download (right click to save)

Hardinge Tool Room Precision Lathe, Model HLVH, #A2177

Mar 14, 2012
Podcast #74 - 21
Podcast #74 - Nambuk Drill and Tapping Press, A2171
Direct Download (right click to save)

Nambuk Drill and Tapping Press, Model NBTG-540, #A2171

Mar 1, 2012
Podcast #73 - 16 Ga. x 36
Podcast #73 - Di-Acro Hydra Mechanical Press Brake, | A2074
Direct Download (right click to save)

16 Ga. x 36" Used Di-Acro Hydra Mechanical Press Brake, #A2074

Feb 16, 2012
Podcast #72 - Rotex Hand Turret Punch, | A2143
Podcast #72 - Rotex Hand Turret Punch, | A2143
Direct Download (right click to save)

2" Used Rotex Hand Turret Punch, Mdl. 18- BK, Punch & Dies, Shear Cut- Off, Stand, Dies from 1/8" to 2" #A2143

Feb 2, 2012
Podcast #71 - Accurshear Hydraulic Power Shear, | A2080
Podcast #71- Accurshear Hydraulic Power Shear, | A2080
Direct Download (right click to save)

1/4" x 10' Used Accurshear Hydraulic Power Shear, Mdl. 625010, Programmable Digital Front Operated Power Back Gauge, Square Arm, Manual Quick Blade Clearance Adjustment, Power Stroke Length Control, Power swing Up Back Gauge, #A2080

Jan 24, 2012
Podcast #70 - Amada Hydraulic Notcher Corner Shear | A2122
Podcast #70- Amada Hydraulic Notcher Corner Shear | A2122
Direct Download (right click to save)

1/8" x 8 5/8" Used Amada Hydraulic Notcher Corner Shear, Mdl. CS-220, Miter Guides, Timer, One Shot Lube System, Electric Foot Pedal, 3 H.P. Motor, #A2122

Jan 12, 2012
Podcast #69 - Tauring CNC Horizontal/Vertical Angle Bender | A2076
Podcast #69- Tauring CNC Horizontal/Vertical Angle Bender | A2076
Direct Download (right click to save)

2" x 2" x .090" Used Tauring CNC Horizontal/Vertical Angle Bender, Mdl. Delta 50, Tauring CNC-S CNC Control, Siemens & Omron Electrical, Hydraulic Top Roll, Tooling Included, #A2076

Dec 22, 2011
Podcast #68- 50 Ton Used Whitney Hydraulic Angle and Flat Shear
Podcast #68- 50 Ton Used Whitney Hydraulic Angle and Flat Shear
Direct Download (right click to save)

50 Ton Used Whitney Hydraulic Angle and Flat Shear W/ Multiple Die Heads, Mdl. 664-500, 6" Flat Shear Attachment, 10" Flat Shear Attachment, 6" Angle Shear Attachment, #A2034

Dec 6, 2011
Podcast #67- 11
Podcast #67 - Lathes - 11" x 18" Hardinge Toolroom Lathe
Direct Download (right click to save)

11" x 18" Hardinge Toolroom Lathe, Mdl. HLV, Lever 5C Collet Closer, Tool Post, One Shot Lube System, 1 1/2 H.P. Motor, 440V 3 Phase, #A1997

Nov 7, 2011
Podcast #66- 20
Podcast #66 - Lathes - Tarnow/Toolmex Gap Bed Engine Lathe
Direct Download (right click to save)

20"/31" x 120" Used Tarnow/Toolmex Gap Bed Engine Lathe, Mdl. TUJ50M-120, 3 Jaw Chuck, Taper Attachment, Rapid Traverse #A1908

Oct 21, 2011
Podcast #65 - 11
Podcast #65 - Lathes - Hardinge Production Toolroom Lathe
Direct Download (right click to save)

11" x 18" Hardinge Super High Precision Production Toolroom Lathe, Mdl. TFB, 5C Collets,Coolant System,Splash Guard,KDK Tool Post, Fast Acting, Four Position Indexing Rod Stop, Year (1998) #A1970

Sep 30, 2011
Podcast #64 - 110 Ton Used Geka Dual Operation Hydraulic Ironworker
Podcast #64 - Ironworkers - Used Geka Dual Operation Hydraulic Ironworker
Direct Download (right click to save)

110 Ton Used Geka Dual Operation Hydraulic Ironworker, Mdl. Hydracrop 110/SD, 1-1/4" x 1" or 1-1/2" x 3/4" Punch, 1/2" Notcher, 24" x 5/8" Flat Shear, 2 Bar Cropper, 6" x 6" x 1/2" Angle Shear (2005) #A1932

Sep 19, 2011
Podcast #63 - Bridgeport CNC 3 Axis Milling Machine
Podcast #63 - Milling Machines - Bridgeport CNC 3 Axis Milling Machine
Direct Download (right click to save)

9" x 48" Used Bridgeport CNC 3 Axis Milling Machine, Mdl. V2XT, Power Draw Bar, Coolant System, Lubrication System #A1927

Aug 29, 2011
Podcast #62 - Cincinnati Hydraulic Power Shear
Podcast #62 - Shears - Cincinnati Hydraulic Power Shear
Direct Download (right click to save)

10 Ga. x 6' Used Cincinnati Hydraulic Power Shear, Mdl. 135HSx6, Front Operated Programmable Digital Micro Computer Back Gauge, Supports Front And Rear (1990) #9391

Aug 4, 2011
Podcast #61 - Trace-A-Punch Nibbling Machine
Podcast #61 - Nibblers - Heck Trace-A-Punch Nibbling Machine
Direct Download (right click to save)

3/16" Used Heck Trace-A-Punch Nibbling Machine, Mdl. 4A, 16" Throat, Stand, Lamp #A1789

Jul 12, 2011
Podcast #60 - Used Sharp Vertical Mill
Podcast #60 - Milling Machines - Used Sharp Vertical Mill (Bridgeport Type)
Direct Download (right click to save)

10" x 50" Used Sharp Vertical Mill, Mdl. 3KV, Sargon 2 Axis Digital Readout System, Servo Table Power Feed, Hardened & Ground Box Ways On Saddle, 3 H.P. #A1649

June 30, 2011
Podcast #59 - Used Sharp Gap Bed Lathe
Podcast #59 - Engine Lathes - Used Sharp Gap Bed Lathe
Direct Download (right click to save)

17"/26" x 60" Used Sharp Gap Bed Lathe, Mdl. 1760, 2 Axis Digital Readout, 3 Jaw Chuck, Steady Rest, Coolant, Foot Brake, 7.5 H.P. #A1771

June 13, 2011
Podcast #58 - 90 Ton Used Piranha Hydraulic Ironworker
Podcast #58 - Ironworkers - 90 Ton Used Piranha Hydraulic Ironworker
Direct Download (right click to save)

90 Ton Used Piranha Hydraulic Ironworker, Mdl. P-90, Joy Stick, Electric Foot Pedal, 15 H.P. 1/2" x 20" Flat Bar Shear, 1 1/8" x 1" Punch, Angle Shear, Coper Notcher #A1743

May 26, 2011
Podcast #57 - 1/4
Podcast #57 - Shears - 1/4" x 12' Used Amada Hydraulic Metal Cutting Power Shear
Direct Download (right click to save)

1/4" x 12' Used Amada Hydraulic Metal Cutting Power Shear, Mdl. H-4065, Front Operated Power Back Gauge With Indicator, Power Stroke Length, Power Rake Adjustment, Year (1980) #A1763

May 16, 2011
Podcast #56 - 20
Podcast #56 - Saws - HEM Double Column Horizontal Bandsaw | A1753
Direct Download (right click to save)

20" x 27" HEM Double Column Horizontal Bandsaw, Mdl. F130HM-DC, Hydraulic Blade Tension, Hyd. Guide Arms, Hyd. Blade Tension, Variable Feed Rate, 10 H.P., Year (1997) #A1753

May 10, 2011
Podcast #55 - 4' x 11
Podcast #55 - Drills - 4' x 11" Used Sharp Radial Arm Drill, Mdl. RD-1230 | A1648
Direct Download (right click to save)

4' x 11" Used Sharp Radial Arm Drill, Mdl. RD-1230, Box Table, Power Clamping, Power Elevation, Coolant System 5 H.P. #A1648

Apr 25, 2011
Podcast #54 - 50 Ton Used Piranha Hydraulic Ironworker
Podcast #54 - Ironworkers - 50 Ton Used Piranha Hydraulic Ironworker | A1744
Direct Download (right click to save)

50 Ton Used Piranha Hydraulic Ironworker, Mdl. P3, 8" Brake Attachement w/ 4 Way Die, Joysticks, 5/8" x 12" Plate Shear, 5" x 3/8" Angle Shear, Coper Notcher #A1744

Apr 15, 2011
Podcast #53 - Brake Press - 60 Ton x 6' Used Wysong CNC Hydraulic Press Brake
Podcast #53 - Saws - 60 Ton x 6' Wysong CNC Hydraulic Press Brake | A1482
Direct Download (right click to save)

60 Ton x 6' Used Wysong CNC Hydraulic Press Brake, Mdl. MTH60-72, Automec CNC 99,2 Axis CNC Back Gauge, Tonnage Control Valve, Remote Dual Palm, Year (2000) #A1482

Mar 31, 2011
Podcast #52 - Saws - Voortman Horizontal Double Mitering Beam Saw
Podcast #52 - Saws - Voortman Horizontal Double Mitering Beam Saw | A1406
Direct Download (right click to save)

20" x 44" Used Voortman Horizontal Double Mitering Beam Saw, Mdl. VB1050, Siemens Simatic Touch Screen Control, Cutting Speed Auto Adjusted To Suite The Profile, Auto Measure Year (2006) #A1406

Mar 14, 2011
Podcast #51 - Lathes - Precision Hardinge Tool Room Lathe
Podcast #51 - Lathes- Hardinge Precision Tool Room Lathe | A1584
Direct Download (right click to save)

11" x 18" Used Hardinge Tool Room Lathe, Mdl. HLVH-EM, Inch/Metric Threading, Acurite 2 Axis Digital Readout, 6 Jaw Buck Chuck, Aloris Tool Post, Drill Chuck, Collets, 5C Collet Closer (1991) #A1584

Feb 28, 2011
Podcast #50 - 11
Podcast #50 - 11" x 58" 12 Ga. x 8' Wysong, Mdl. 1296
Direct Download (right click to save)

12 Ga. x 8' Used Wysong, Mdl. 1296, Front Operated Power Back Gauge with Indicator,Front Supports, Air Trip Mechanical Clutch , Supports #8529

Feb 7, 2011
Podcast #49 - 11
Podcast #49 - 11" x 58" Bridgeport Vertical Mill
Direct Download (right click to save)

11" x 58" Bridgeport CNC Vertical Mill, Mdl. Series 2 SWI Trax, Swi Trax 2 Axis CNC Control, Variable Power Feed on Spindle & Knee, Auto Lube #A1448

Feb 7, 2011
Podcast #48 - 11
Podcast #48 - 11" x 18" Used Hardinge Tool Room Lathe
Direct Download (right click to save)

11" x 18" Used Hardinge Tool Room Lathe, Mdl. HLVH, Acu-Rite 2 Axis Digital Readout System, 5C Collet Closer, Coolant System (1991) #A1427

Jan 27, 2011
Podcast #47 - 16
Podcast #47 - 16" x 60" Used Okuma CNC Cylindrical Grinder
Direct Download (right click to save)

16" x 60" Used Okuma CNC Cylindrical Grinder, Mdl. GP-44N, Okuma OSP 5000-G CNC Control 3 Axis (C-X-Z) 2 Axis Simultaneous Swing Down Internal Grinding Attachment, Auto Lube System, Coolant (1990) #A1373

Jan 27, 2011
Podcast #46 - 1/4
Podcast #46 - 1/4" x 8" x 8" Amada Hydraulic Notching Machine
Direct Download (right click to save)

1/4" x 8" x 8" Amada Hydraulic Notching Machine, Mdl. CSH - 220, Work Guides, Continuous Operation with Timer, Manual Adjustment #8986

Jan 27, 2011
Podcast #45 - 55 Ton x 4' LVD CNC Hydraulic Press Brake, Mdl. 55 BH 04 MNC, LVD Model MNC 90, 6 Axis CNC Back Gauge, Remote Dual Palm Control Stand (1990) | 9327
Podcast #45 - 55 Ton x 4' LVD CNC Hydraulic Press Brake
Direct Download (right click to save)

55 Ton x 4' LVD CNC Hydraulic Press Brake, Mdl. 55 BH 04 MNC, LVD Model MNC 90, 6 Axis CNC Back Gauge, Remote Dual Palm Control Stand (1990) #9327

Jan 27, 2011
Podcast #44 - 40 Ton x 14
Podcast #44 - 40 Ton x 14" Nugier Air Operated H Frame Press
Direct Download (right click to save)

40 Ton x 14" Nugier Air Operated H Frame Press, Mdl. H40-14 APBD, Movable Ram, Pressure Gauge #9711

Jan 27, 2011
Podcast #43 - 9
Podcast #43 - 9" x 42" Bridgeport Vertical Mill
Direct Download (right click to save)

9" x 42" Bridgeport Vertical Mill, Mdl. Series 1, Sony 2 Axis Digital Readout, Table Power Feed, One Shot Lube System, Chrome Ways, Collets #A1415

Jan 25, 2011
Podcast #42 - 20
Podcast #42 - 20" DoAll Vertical Bandsaw
Direct Download (right click to save)

20" DoAll Vertical Bandsaw, Mdl. 2013-V, Blade Welder, Grinder, Cutoff, Mitering Attachment, Rip Fence #A1449

Jan 25, 2011
Podcast #41 - 35 Ton Metal Muncher II Hydraulic Ironworker, Mdl. MM35, 24
Podcast #41 - 35 Ton Metal Muncher II Hydraulic Ironworker
Direct Download (right click to save)

35 Ton Metal Muncher II Hydraulic Ironworker, Mdl. MM35, 24" Brake Attachment with 4 Way Bottom Die, Punches & Dies, Electric Foot Pedal #A1430

Jan 25, 2011
Podcast #40 - 24
Podcast #40 - 24"/33" x 120" Mori Seiki Engine Lathe
Direct Download (right click to save)

24"/33" x 120" Mori Seiki Engine Lathe, Mdl. MH 3000, 18" 4 Jaw Chuck, Taper Attachment, Steady Rest, Power Rapid Traverse, Coolant #A1278

Jan 25, 2011
Podcast #39 - 8
Podcast #39 - 8" x 77" Newton Oscillating Universal Edge Sander
Direct Download (right click to save)

8" x 77" Newton Oscillating Universal Edge Sander, Mdl. E - 30, Tilt Table, 8" x 30" Each Platen Size #9966

Jan 25, 2011
Podcast #38 - 1/4
Podcast #38 - 1/4" x 10' Clearing Niagara Power Shear
Direct Download (right click to save)

1/4" x 10' Clearing Niagara Power Shear, Mdl. IF- 10 1/4 II, Niagara MPC 2100 Programmable Digital Front Operated Power Back Gauge, Gap Adjustment (1995) #9724

Jan 19, 2011
Podcast #37 - 10
Podcast #37 - 10" x 12" Used Daewoo CNC Turning Center
Direct Download (right click to save)

10" x 12" Used Daewoo CNC Turning Center, Mdl. LYNX-210LC, Fanuc i CNC Control, Eco Load Programmable Bar Feeder, Turbo Scrap Conveyor, Hydraulic Programmable Tailstock, Hyd. Collet Chuck (2002) #A1412

Jan 19, 2011
Podcast #36 - 11
Podcast #36 - 11" x 14" Used Haas CNC Turning Center
Direct Download (right click to save)

11" x 14" Used Haas CNC Turning Center, Mdl. SL-10T, Haas CNC Control, Programmable Tailstock W/ Hydraulic Quill, 6" Power Three Jaw Chuck, 3JR Collet Chuck W/ Collets, Presetter, 1137 Hours (2004) #A1443

Jan 19, 2011
Podcast #35 - 16
Podcast #35 - 16" x 32" Used Chevalier CNC Automatic Surface Grinder
Direct Download (right click to save)

16" x 32" Used Chevalier CNC Automatic Surface Grinder, Mdl. FSG- 1632 TXII, Chevalier PC-Based CNC Control, 2 Axis, Cross & Downfeed (Ball Screws) , Canned Cycles, Plunge, Creep Feed (1996) #9672

Jan 17, 2011
Podcast #34 - 16
Podcast #34 - 16" x 38" ATrump CNC Flat Bed Lathe
Direct Download (right click to save)

16" x 38" Trump CNC Flat Bed Lathe, Mdl. KL-1640, Centroid T400 S CNC Control, 6 Station Indexing Turret, 3 Jaw, Manual Tailstock, Color Monitor #A1447

Jan 17, 2011
Podcast #33 - 25
Podcast #33 - Nardini Engine Lathe
Direct Download (right click to save)

25"/34" x 60" Nardini Engine Lathe, Mdl. SZ- 2560T, DRO, 4 Jaw, Taper Attach. #8969

Jan 17, 2011
Podcast #32 - 10
Podcast #32 - 10" x 50" Atrump CNC Vertical Mill (4 Axis)
Direct Download (right click to save)

10" x 50" ATrump CNC Vertical Mill (4 Axis), Mdl. 3VK Inverter-DC, Centroid M400 4 Axis CNC Control, 6" 3 Jaw Rotary Indexer, Power Draw Bar, DRO on Knee, 70 - 5,000 RPM, #A1446

Jan 13, 2011
Podcast #31 - Euromatic Hydraulic Variable Angle Power Notcher | A1407
Podcast #31 - Euromatic Hydraulic Variable Angle Power Notcher
Direct Download (right click to save)

1/4" x 8.6" Used Euromac Hydraulic Variable Angle Power Notcher, Mdl. 220-65, Angle Adjustment from 30-140 Degrees,Twin Work Guides, Automatic Blade Gap Adjustment, Electric Foot Pedal, Scrap Chute A1407

Jan 13, 2011
Podcast #30 - 175 Ton x 14' Cincinnati CNC Hydraulic Press Brake | 9979
Podcast #30 - Cincinnati CNC Hydraulic Press Brake
Direct Download (right click to save)

175 Ton x 14' Cincinnati CNC Hydraulic Press Brake, Mdl. 175 CBII x 12, Cincinnati 4 Axis CNC Control, 2 Axis Back Gauge, Light Curtains, Bed Crowning Attachment, Drilled & Machined for Flange (1997) 9979

Jan 13, 2011
Podcast #29 - 18
Podcast #29 - Hyd-Mech Automatic Horizontal Bandsaw
18" x 18" Used Hyd-Mech Automatic Horizontal Bandsaw (Twin Post Design), Mdl. H-18, Mitsubishi PLC Control (Programmable), Hydraulic Bar Feed, Hydraulic Tension and Vises (1999) A1326

Nov 4, 2010
Podcast #28 - Band Saw - New Acra Horizontal/Vertical
Podcast #28 - 11" x 18" Hardinge Toolroom Lathe
Direct Download (right click to save)

11" x 18" Used Hardinge Toolroom Lathe, Mdl. HLV -H, Cushman 3 Jaw Chuck, Lever 5C Collet Closer, 2 Racks Of Collets, Face Plate, Low Hours, Runs Great (1981) #A1414

Oct 28, 2010
Podcast #27 - Band Saw - New Acra Horizontal/Vertical
Podcast #27 - 11" x 58" Used Bridgeport Vertical Mill | H-18
Direct Download (right click to save)

11" x 58" Used Bridgeport Series ll Vertical Mill, Mdl. Series ll, Sargon 3 Axis Digital Readout System, 3 Axis Power Feeds W/ Rapid Traverse, Universal Quick Switch Spindle, Auto Lube #A1031

Oct 21, 2010
Podcast #26 - Band Saw - New Acra Horizontal/Vertical
Podcast #26 - Horizontal Band Saw - Used Hyd-Mech | H-18
Direct Download (right click to save)

18" x 18" Used Hyd-Mech Automatic Horizontal Bandsaw (Twin Post Design), Mdl. H-18, Mitsubishi PLC Control (Programmable), Hydraulic Bar Feed, Hydraulic Tension and VIses (1999) #A1326

Oct 14, 2010
Podcast #25 - Band Saw - New Acra Horizontal/Vertical
Podcast #25 - 16" x 16" Hyd-Mech Horizontal Bandsaw | H-16
Direct Download (right click to save)

16" x 16" Used Hyd-Mech Automatic Horizontal Bandsaw (Twin Post Design), Mdl. H-16, Hyd-Mech PLC 100 Control (Programmable), Hydraulic Bar Feed With Multi Indexing, Blade Tension & Vises (1995) #A1327

Oct 4, 2010
Podcast #24 - Band Saw - New Acra Horizontal/Vertical
Podcast #24 - Band Saw - New Acra Horizontal/Vertical
Direct Download (right click to save)

Acra, New, Sterling Machinery, Band Saw UE712, Mdl UE712, Coolant System, Work Length Stop, Casters, Single Phase Motor.

Sept 17, 2010
Podcast #23 - Scotchman Demo Truck - (Final) Episode 5
Podcast #23 - Scotchman Demo Truck - Final Episode 5!
Direct Download (right click to save)

In our final episode, Bob demonstrates the Band Saw SH1016 - 45 degree Head Swing, 2 HP Variable Speed Blade Drive.

Sept 2, 2010
Podcast #22 - Scotchman Demo Truck - Episode 4.5
Podcast #22 - Scotchman Demo Truck (continued) - Episode 4.5
Direct Download (right click to save)

We take a spin on the Cold Saw CPL 350 w/Advanced Feed System

Aug 23, 2010
Podcast #21 - Scotchman Demo Truck - Episode 4
Podcast #21 - Scotchman Demo Truck - Episode 4
Direct Download (right click to save)

We take a spin on the Cold Saw CPL 350 w/Advanced Feed System

Aug 5, 2010
Podcast #20 - Scotchman Demo Truck - Episode 3
Podcast #20 - Scotchman Demo Truck - Episode 3
Direct Download (right click to save)

We get some action with the Cold Saw CPL 350 in Episode 3

July 22, 2010
Podcast #19 - Scotchman Demo Truck - Episode 2
Podcast #19 - Scotchman Demo Truck - Episode 2
Direct Download (right click to save)

Bob moves on to the DO 95/140-24M in Episode 2

July 9, 2010
Podcast #18 - Scotchman Demo Truck - Episode 1
Podcast #18 - Scotchman Demo Truck - Episode 1
Direct Download (right click to save)

Bob Van Lint gives us a working demo using the Ironworker 5014-TM

June 18, 2010
Podcast #17 - Engine Lathe
Podcast #17 - Monarch Engine Lathe
Direct Download (right click to save)

28" x 178" Used Monarch Engine Lathe, Mdl. 1610, 3 & 4 Jaw Chuck, Taper Attachment, Follow Rest, Tool Post, Monarch Rebuilt In 1993 #A1199

June 1, 2010
Podcast #16 - Surface Grinder
Podcast #16 - Surface Grinder
Direct Download (right click to save)

12" x 24" Used Okamoto Automatic Surface Grinder: Electro Magnetic Chuck & Control, Coolant System & Splash Guard (1999)

May 18, 2010
Podcast #15 - Engine Lathe
Podcast #15 - Engine Lathe
Direct Download (right click to save)

Demo of a Clausing Engine Lathe

May 3, 2010
Podcast #14 - Westec Episode 5Westec 2010 Series
Podcast #14 - Westec Episode 5
Direct Download (right click to save)

We get a demonstration from Spencer Chen on the Monkie Bender machine.

April 23, 2010
Podcast #13 - Westec Episode 4Westec 2010 Series
Podcast #13 - Westec Episode 4
Direct Download (right click to save)

Demos of a Piranha P-50 and a P-90 Ironworker Metal Machines. Here we visit the Piranha Megafab booth and discover Piranha Ironworkers New Products.

April 16, 2010
Podcast #12 - Westec Episode 3Westec 2010 Series
Podcast #12 - Westec Episode 3
Direct Download (right click to save)

We move on to the Doringer booth with the president
himself, Mr. Bill Bailey.

April 9, 2010
Podcast #11 - Westec Episode 2Westec 2010 Series
Podcast #11 - Westec Episode 2
Direct Download (right click to save)

We continue our visit with Scotchman at Westec 2010.
Part 3 coming next week!

March 31, 2010
Podcast #10 - Westec Episode 1Westec 2010 Series
Podcast #10 - Westec Episode 1
Direct Download (right click to save)

Sterling Visits the Scotchman booth at Westec 2010 for a quick machine demo.
Look for part 2 of our Westec 2010 coverage coming soon!

March 15, 2010
Podcast #9 - Tube Bender
Podcast #9 - Tube Bender
Direct Download (right click to save)

Tube bender demonstration video for machine #A1185
1 1/4'' Used Pines Hydraulic Vertical Tube Bender, Mdl. 3T-M72851,
Remote Pedestal Control, Dual Palm Station and Set of dies.

March 1, 2010
Podcast #8 - Horizontal Bandsaw
Podcast #8 - Horizontal Bandsaw
Direct Download (right click to save)

This video shows how an automatic Horizontal Bandsaw works and the options availble.
9" x 16" Doall Automatic Horizontal Bandsaw, Mdl. C-916A, Powered Roller Feed Vise (Pinch Type),
Pneumatic Head Rise & Fall, Variable Speed Drive, Work Length Stop, Roller Table, Coolant

February 16, 2010
Podcast #7 - Rotary Grinder
Podcast #7 - Rotary Grinder
Direct Download (right click to save)

We review the basic features and applications on a Used
16" Blanchard Rotary Surface Grinder w/16" Electro Magnetic Chuck & Control,
Pneumatic Table Feed (In & Out)

February 02, 2010
Podcast #6 - Belt Grinder
Podcast #6 - Belt Grinder
Direct Download (right click to save)

We discuss the basic functions and operations of a belt sander.

January 19, 2010
Podcast #5 - Barrel Finisher
Podcast #5 - Barrel Finisher
Direct Download (right click to save)

These machines provide the most economical high speed finishing available.
They operate on a fherris wheel principal with a 1:1 ratio of barrel rotation to turret rotation.

January 4, 2010
Podcast #4 - Plate Roll
Podcast #4 - Plate Roll
Direct Download (right click to save)

Demonstration video featuring a 12 gauge Wysong Initial Pinch Power Roll-
Front Operated Manual, Rear Roll Adjustment, Manual Drop End - Stock #A1023

December 22, 2009
Podcast #3 - Vertical Mill
Podcast #3 - Vertical Mill
Direct Download (right click to save)

How to use a Vertical Milling Machine (basic functions).

December 7, 2009
Podcast #2 - Bandsaw Basics
Podcast #2 - Bandsaw Basics
Direct Download (right click to save)

Basics of a Vertical Bandsaw Machine Including
Welding, Blade Speed, Pneumatic Table feed and more.

November 24, 2009
Podcast #1 - About Us
Podcast #1 - About Us
Direct Download (right click to save)

A little about Sterling Machinery.